抱歉我沒注意到竟然沒上傳到

看起來應該是分界符號有錯，如果方便能把 120 ~ 134 行貼上來嗎？

Created by

cfgmaker groupro@10.50.132.250 --global "workdir: c:\inetpub\wwwroot\tamas" --output tamas701.cfg

Global Config Options

for UNIX

WorkDir: /home/http/mrtg

or for NT

WorkDir: c:\mrtgdata

Global Defaults

to get bits instead of bytes and graphs growing to the right

Options[_]: growright, bits

EnableIPv6: no

######################################################################

System: D2FN2960S-132.250FOC1717Y0JG

Description: Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE7, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Mon 28-Jan-13 10:28 by prod_rel_team

Contact:

Location:

######################################################################

Interface 632 >> Descr: 'Vlan632' | Name: 'Vl632' | Ip: '10.50.132.250' | Eth: '0c-27-24-15-c7-41'

Target[10.50.132.250_632]: 632:groupro@10.50.132.250:
SetEnv[10.50.132.250_632]: MRTG_INT_IP="10.50.132.250" MRTG_INT_DESCR="Vlan632"
MaxBytes[10.50.132.250_632]: 125000000
Title[10.50.132.250_632]: Traffic Analysis for 632 -- D2FN2960S-132.250FOC1717Y0JG
PageTop[10.50.132.250_632]: Traffic Analysis for 632 -- D2FN2960S-132.250FOC1717Y0JG



System:
D2FN2960S-132.250FOC1717Y0JG in


Maintainer:



Description:
Vlan632


ifType:
propVirtual (53)


ifName:
Vl632


Max Speed:
125.0 MBytes/s


Ip:
10.50.132.250 (No DNS name)

workdir: c:\inetpub\wwwroot\tamas

你的 cfg 蠻奇怪的…可以列出你產生 cfg 的指令嗎？

perl cfgmaker groupro@10.50.132.250 --global "workdir: c:\inetpub\wwwroot\tamas" --output tamas701.cfg
大大就是這一串
好像都沒抓到資料
是哪邊有錯誤嗎?但是我先前抓別台交換機都沒有這問題,這兩天突然都不行了

那你要確認一下你的 SNMP 服務是不是有新增 groupro 這個資源