去ifttt申請一個帳號 https://ifttt.com/explore
後使用以下程式

#include <WiFi.h>
#include <HTTPClient.h>
#include <SimpleDHT.h>
//請修改以下參數--------------------------------------------
char ssid[] = "SSID";
char password[] = "SSIDpassword";
//將原本ThingSpeak的網址換成ifttt網址
String url = "http://maker.ifttt.com/trigger/換成你的事件/with/key/換成你的APIKey";

int pinDHT11 = 4;//假設DHT11 接在GPIO4，接線圖請參考P74
//---------------------------------------------------------
SimpleDHT11 dht11(pinDHT11);//宣告SimpleDHT11物件

void setup()
{
Serial.begin(115200);
Serial.print("開始連線到無線網路SSID:");
Serial.println(ssid);
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".");
delay(1000);
}
Serial.println("連線完成");
}

void loop()
{
//start working...
Serial.println("=============");
byte temperature = 0;
byte humidity = 0;
int err = SimpleDHTErrSuccess;
if ((err = dht11.read(&temperature, &humidity, NULL)) != SimpleDHTErrSuccess) {
Serial.print("溫度計讀取失敗，錯誤碼="); Serial.println(err); delay(1000);
return;
}
//讀取成功，將溫濕度顯示在序列視窗
Serial.print("溫度計讀取成功: ");
Serial.print((int)temperature); Serial.print(" *C, ");
Serial.print((int)humidity); Serial.println(" H");
//開始傳送到thingspeak
Serial.println("啟動網頁連線");
HTTPClient http;
//將溫度及濕度以HTTP Get參數方式補入網址後方
String url1 = url + "?value1=" + (int)temperature + "&value2=" + (int)humidity;
//http client取得網頁內容
http.begin(url1);
int httpCode = http.GET();
if (httpCode == HTTP_CODE_OK) {
//讀取網頁內容到payload
String payload = http.getString();
//將內容顯示出來
Serial.print("網頁內容=");
Serial.println(payload);
} else {
//讀取失敗
Serial.println("網路傳送失敗");
}
http.end();
delay(20000);//休息20秒
}