VPC==>VM建立的伺服器
1.先確認VPC是否可以上網
2.確認VPC與實體是否在同一網段->如果不是則你選了NAT模式
3.VPC是否有防火牆…先關,測試成功再開
4.你是否有裝兩張(含)以上的網路卡,要在VMware Network中設置正確。
預設是選Nat:used to share the host's ip address
請把他改為Bridged:connected directly to the physical network
至於Replicate physical network connection state 請依照自己的需求設定
Bridged:connected directly to the physical network (橋接：直接連接到實際網絡)
Replicate physical network connection state(複製實際網絡連接狀態)
Nat:used to share the host's ip address (共享主機的IP地址)
Host-only:a private network shared with the host (專用網絡與主機共享)
Custom:specific virtual network (自定義：特定的虛擬網絡)

http://blog.faq-book.com/?p=276