系統:Debian 6.0
光纖卡:qla2XXX
Storage: HP MSA 1000
系統抓的到qla2XXX的卡,也可以看到MSA1000的資訊,但是我看不到他可以讓我mount的磁碟代號,我在Google都搜尋不到相關資訊,所以想在這邊請問一下有無相關經驗的高手,可以指點一下迷津.
PS:MSA1000在slackware作業系統上是可以mount的,但是設定的工程師已經離開,所以無從問起)
附上LOG,請大家叁考一下,謝謝!

qla2xxx 0000:03:02.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35
qla2xxx 0000:03:02.0: Found an ISP2312, irq 35, iobase 0xf7f70000
qla2xxx 0000:03:02.0: Configuring PCI space...
qla2xxx 0000:03:02.0: Configure NVRAM parameters...
qla2xxx 0000:03:02.0: Verifying loaded RISC code...
qla2xxx 0000:03:02.0: firmware: requesting ql2300_fw.bin
qla2xxx 0000:03:02.0: Allocated (412 KB) for firmware dump...
qla2xxx 0000:03:02.0: LIP reset occurred (f7f7).
scsi4 : qla2xxx
qla2xxx 0000:03:02.0:
QLogic Fibre Channel HBA Driver: 8.03.01-k6
QLogic QLA2340 -
ISP2312: PCI-X (133 MHz) @ 0000:03:02.0 hdma-, host#=4, fw=3.03.28 IPX
qla2xxx 0000:03:02.0: LOOP UP detected (2 Gbps).
scsi 4:0:0:0: RAID COMPAQ MSA1000 4.48 PQ: 0 ANSI: 4
scsi 4:0:0:0: Attached scsi generic sg2 type 12