iT邦幫忙

0

cisco switch post error

Dear 各位大大,
請問我這台switch發生什麼事了
怎麼開機無法使用,且進入ROM的模式也無法看見flash
無法重新load image ,請各位大大不吝指教,感恩

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 28-Jul-06 04:33 by yenanh
Image text-base: 0x00003000, data-base: 0x00AA2F34

Initializing flashfs...

flashfs[1]: 4 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 4676608
flashfs[1]: Bytes available: 27837440
flashfs[1]: flashfs fsck took 0 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed

POST: CPU MIC PortASIC interface Loopback Tests : Begin
POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: Cannot bring up both Stack Rings in PhyLoopback

POST: Failed Packet Receive asic 2 queue 1
POST: PortASIC RingLoopback Tests : End, Status Failed

POST: port-asic ring loopback test failed
driver class subsystem initialization failed

cisco WS-C2960G-24TC-L (PowerPC405) processor (revision B0) with 61440K/4088K bytes of memory.
Processor board ID FOC1030Z323
Last reset from power-on
The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:19:06:92:40:80
Motherboard assembly number : 73-10015-05
Power supply part number : 341-0098-02
Motherboard serial number : FOC102956HE
Power supply serial number : AZS102605C7
Model revision number : B0
Motherboard revision number : B0
Model number : WS-C2960G-24TC-L
System serial number : FOC1030Z323
Top Assembly Part Number : 800-26673-02
Top Assembly Revision Number : B0
Version ID : V02
CLEI Code Number : COM3G00BRA
Hardware Board Revision Number : 0x01

!!! WARNING: The switch is not usable !!!
Unable to create l2trace server process, socket_open() failed

Press RETURN to get started!

2
cafebug
iT邦高手 2 級 ‧ 2014-03-20 17:44:10
最佳解答

剛剛查了一下,"Unable to create l2trace server process, socket_open() failed" 訊息應該是硬體的問題,需要送回去換一台.. (希望你還在保固內)

你的POST階段fail好幾個地方:
POST: Failed Packet Receive asic 2 queue 1
POST: PortASIC RingLoopback Tests : End, Status Failed
POST: port-asic ring loopback test failed
driver class subsystem initialization failed

哈,過保了
另外想請教這樣看的出來是壞那些地方嗎 感謝您

2
fdlintw
iT邦研究生 4 級 ‧ 2014-03-20 17:06:27

壞了

請送修

感謝,請問壞的地方是??

fdlintw iT邦研究生 4 級 ‧ 2014-03-21 11:24:26 檢舉

這就無能為力了

2
macliu
iT邦研究生 5 級 ‧ 2014-03-21 13:44:02

我之前交過一批貨
也是2960-24TC

那時也出現類似錯誤
後來我們是更新IOS解決

--

================================
馬克資訊科技有限公司(M.I.T.C.)
系統工程師
Mac Liu(劉淵精)
[MCSE/MCDBA/CCNA/TCSE/RHCSA/RHCE]
macliu@mac-tech.idv.tw
Http://www.mac-it.com.tw
TEL:02-87928846
FAX:02-87928845
Mobile:0927-300404
MSN&FB:macliu_tw@hotmail.com

公司資格:丙種電器承裝業、丙種電信工程業
人員資格:丙級用電設備檢驗技術士(166-007098)、丙級網路架設技術士(172-000664)、丙級電腦硬體裝修技術士(120-117438)、乙級電腦硬體裝修技術士(120-007804)、丙級視聽電子技術士(029-018052)、丙級工業電子技術士(028-131687)
訓練資格:勞工安全衛生管理員結訓、佈線系統測試工程師結訓
特殊資格:甲種勞工安全衛生業務主管、初級救護技術員、基本救命術指導員、繩索作業技術人員、中華山岳協會C級運動攀登教練
保險資格:人身壽險業務員、產物保險業務員

我要發表回答

立即登入回答