小弟又上來發問…上一次也有問過一樣的問題，這次是有實體機器做LAB，但一樣沒辦法成功…真的不曉得問題出在哪…請各位前輩給予指導。

1、NPS

2、Cisco Switch C3650
OA_Core_SW(config)#aaa new-model
OA_Core_SW(config)#aaa authentication dot1x default group radius
OA_Core_SW(config)#aaa authorization network default group radius
OA_Core_SW(config)#dot1x system-auth-control
OA_Core_SW(config)#ip radius source-interface vlan 10
OA_Core_SW(config)#radius-server host 192.168.1.253 auth-port 1812 acct-port 1813 key cisco

Interface
OA_Core_SW(config)#int gig1/0/19
OA_Core_SW(config-if)#switchport access vlan 30
OA_Core_SW(config-if)#switchport mode access
OA_Core_SW(config-if)#authentication control-direction in
OA_Core_SW(config-if)#authentication host-mode single
OA_Core_SW(config-if)#authentication port-control auto
OA_Core_SW(config-if)#authentication violation protect
OA_Core_SW(config-if)#mab eap
OA_Core_SW(config-if)#dot1x pae authenticator
OA_Core_SW(config-if)#spanning-tree portfast
OA_Core_SW(config-if)#spanning-tree bpduguard

3、PC

4、NPS Log
NPS Log有開，但都沒有事件產生，在LogFiles裡面也沒看到相關記錄檔