Srx 1500 cluster問題

juniper

andy2230666 2024-12-05 17:25:34 ‧ 398 瀏覽

分享至

各位大大我有兩個小問題
1.
set chassis cluster redundancy-group 0 node 0 priority 200
set chassis cluster redundancy-group 0 node 1 priority 100
set chassis cluster redundancy-group 1 node 0 priority 200
set chassis cluster redundancy-group 1 node 1 priority 100
node0 priority比較高
node1 priority比較低

但我如果把node0 reboot
node1 就會變成 primary
那我node0 開起來後就會變成secondary
node0不會主動變回去primary
我要怎麼讓node0重新開起來後自動變成primary?

如果我公司建好cluster
node0 mgmt ip:192.168.1.1
node1 mgmt ip:192.168.1.2
我利用vpn進去到公司內
但我卻只能ping的到node0
node1沒辦法ping到
只有當node0掛掉才能ping到node1
請問有什麼辦法可以讓兩台都ping的到呢?

登入發表討論

直播研討會

{{ item.channelVendor }} {{ item.webinarstarted }} |

直播中

1 個回答

barkerxavierr

iT邦見習生 ‧ 2024-12-06 11:54:57

you can check the firewall configurations of both nodes. There might be some firewall rule on node1 that is blocking access from your IP when node0 is up.