最近公司電腦的Print Spooler會自己關閉,
導致印表機不能列印,有時候從服務想開啟它,
它馬上又會關閉,我有試著用MMC將驅動程式全部移除重新安裝,
但沒有幫助,這情況要如何處理,是什麼問題造成的。
補充:目前有問題的電腦OS:WIN7 PRO 32BIT,
印表機用EPSON M200DN 及EPSON6200裝上平行阜印表機共享。
應該會有event log 要看內容才能判斷原因,不然就要格空把脈囉!
以下是我的錯誤事件:
失敗的應用程式名稱: spoolsv.exe,版本: 6.1.7601.17777,時間戳記: 0x4f35efc3
失敗的模組名稱: briu10a.dll,版本: 0.3.0.0,時間戳記: 0x4b595996
例外狀況碼: 0xc0000005
錯誤位移: 0x000053a1
失敗的處理程序識別碼: 0x5dc
失敗的應用程式開始時間: 0x01d06a848f2ff4d9
失敗的應用程式路徑: C:\windows\System32\spoolsv.exe
失敗的模組路徑: C:\windows\system32\spool\DRIVERS\W32X86\3\briu10a.dll
報告識別碼: 1721fa44-d6b1-11e4-a629-ac220b894d7b
wang19881114提到:
briu10a.dll
版大列出來的只有Epson印表機。
看起來像殘留的Brother Printer Driver問題...
對,還有一台Brother Printer,因為通常都用來掃描,所以很少再用給他忘記了。
請先將用不到的印表機驅動程式刪除, 最好是也要將印表機的"伺服器內容"內的驅動程式也完全刪除, 如果可以的話, 也將登錄檔內不必要的印表機也刪除。
我之前遇到這種問題,可以重灌就重灌吧...
不能重灌就寫個批次檔放桌面,把Print Spooler這個服務重新啟動。
這個有幫助到我,WIN10也可用,感謝。
http://www.techsupportall.com/Print-Spooler-Repair-Tool.exe
下載Stalled Printer Repair,把print job 清空,重啟服務應該就OK了。
http://download.ithome.com.tw/Stalled-Printer-Repair/4154?from=Category
Is "Printer Spooler Error" showing? Or on the other hand you are getting the message like Printer Connection Failed, Please Restart the Spooler, or the Local Print Spooler Service isn't Running? These sorts of blunders are too irritating as they can gobble up a lot of your valuable time. Fortunately, fortunately these baffling issues are very normal. Along these lines, keep perusing this post to get familiar with what is a printer spooler subsystem error, how to fix printer spooler error in windows xp, and so on contact us if your problem doesn’t resolve 1-844-273-6540.
https://www.printersupport24x7.com/questions/how-to-fix-printer-spooler-error/
This article is perfect and easy to understand. Also, for the printing needs for the every solution. The Printer driver download is basic for the installation. Now a days, the technology growing faster than think.