iT邦幫忙

2021 iThome 鐵人賽

DAY 25
0
自我挑戰組

從C到JS的同步非同步探索系列 第 25

[Day 25] Node Event loop 4

  • 分享至 

  • xImage
  •  

前言

今天繼續看看 event loop 的核心循環, uv_run() , 可以查看以下網址

https://github.com/nodejs/node/blob/e46c680bf2b211bbd52cf959ca17ee98c7f657f5/deps/uv/src/win/core.c

主要循環

int uv_run(uv_loop_t *loop, uv_run_mode mode) {
  DWORD timeout;
  int r;
  int ran_pending;

  r = uv__loop_alive(loop);
  if (!r)
    uv_update_time(loop);

  while (r != 0 && loop->stop_flag == 0) {
    uv_update_time(loop);
    uv__run_timers(loop);

    ran_pending = uv_process_reqs(loop);
    uv_idle_invoke(loop);
    uv_prepare_invoke(loop);

    timeout = 0;
    if ((mode == UV_RUN_ONCE && !ran_pending) || mode == UV_RUN_DEFAULT)
      timeout = uv_backend_timeout(loop);

    if (pGetQueuedCompletionStatusEx)
      uv__poll(loop, timeout);
    else
      uv__poll_wine(loop, timeout);

    /* Run one final update on the provider_idle_time in case uv__poll*
     * returned because the timeout expired, but no events were received. This
     * call will be ignored if the provider_entry_time was either never set (if
     * the timeout == 0) or was already updated b/c an event was received.
     */
    uv__metrics_update_idle_time(loop);

    uv_check_invoke(loop);
    uv_process_endgames(loop);

    if (mode == UV_RUN_ONCE) {
      /* UV_RUN_ONCE implies forward progress: at least one callback must have
       * been invoked when it returns. uv__io_poll() can return without doing
       * I/O (meaning: no callbacks) when its timeout expires - which means we
       * have pending timers that satisfy the forward progress constraint.
       *
       * UV_RUN_NOWAIT makes no guarantees about progress so it's omitted from
       * the check.
       */
      uv__run_timers(loop);
    }

    r = uv__loop_alive(loop);
    if (mode == UV_RUN_ONCE || mode == UV_RUN_NOWAIT)
      break;
  }

  /* The if statement lets the compiler compile it to a conditional store.
   * Avoids dirtying a cache line.
   */
  if (loop->stop_flag != 0)
    loop->stop_flag = 0;

  return r;
}

今天繼續看主要循環, 我們要來看
ran_pending = uv_process_reqs(loop);

這句代表 pending 階段

uv_process_reqs

INLINE static int uv_process_reqs(uv_loop_t* loop) {
  uv_req_t* req;
  uv_req_t* first;
  uv_req_t* next;

  if (loop->pending_reqs_tail == NULL)
    return 0;

  first = loop->pending_reqs_tail->next_req;
  next = first;
  loop->pending_reqs_tail = NULL;

  while (next != NULL) {
    req = next;
    next = req->next_req != first ? req->next_req : NULL;

    switch (req->type) {
      case UV_READ:
        DELEGATE_STREAM_REQ(loop, req, read, data);
        break;

      case UV_WRITE:
        DELEGATE_STREAM_REQ(loop, (uv_write_t*) req, write, handle);
        break;

      case UV_ACCEPT:
        DELEGATE_STREAM_REQ(loop, req, accept, data);
        break;

      case UV_CONNECT:
        DELEGATE_STREAM_REQ(loop, (uv_connect_t*) req, connect, handle);
        break;

      case UV_SHUTDOWN:
        /* Tcp shutdown requests don't come here. */
        assert(((uv_shutdown_t*) req)->handle->type == UV_NAMED_PIPE);
        uv_process_pipe_shutdown_req(
            loop,
            (uv_pipe_t*) ((uv_shutdown_t*) req)->handle,
            (uv_shutdown_t*) req);
        break;

      case UV_UDP_RECV:
        uv_process_udp_recv_req(loop, (uv_udp_t*) req->data, req);
        break;

      case UV_UDP_SEND:
        uv_process_udp_send_req(loop,
                                ((uv_udp_send_t*) req)->handle,
                                (uv_udp_send_t*) req);
        break;

      case UV_WAKEUP:
        uv_process_async_wakeup_req(loop, (uv_async_t*) req->data, req);
        break;

      case UV_SIGNAL_REQ:
        uv_process_signal_req(loop, (uv_signal_t*) req->data, req);
        break;

      case UV_POLL_REQ:
        uv_process_poll_req(loop, (uv_poll_t*) req->data, req);
        break;

      case UV_PROCESS_EXIT:
        uv_process_proc_exit(loop, (uv_process_t*) req->data);
        break;

      case UV_FS_EVENT_REQ:
        uv_process_fs_event_req(loop, req, (uv_fs_event_t*) req->data);
        break;

      default:
        assert(0);
    }
  }

  return 1;
}

可以看到裡面是標準的 IOCP pattern , 透過檢測事件種類, 決定要使用哪種函數

除了定時觸發事件, 會在 timer heap (前天內容) 處理, 和其餘極少數事件, 其他全在這邊處理。

而這裡也是 Node 非同步 schedule 的核心實踐。

我們隨意挑一種事件的處理看看

查看 uv_process_async_wakeup_req

void uv_process_async_wakeup_req(uv_loop_t* loop, uv_async_t* handle,
    uv_req_t* req) {
  assert(handle->type == UV_ASYNC);
  assert(req->type == UV_WAKEUP);

  handle->async_sent = 0;

  if (handle->flags & UV_HANDLE_CLOSING) {
    uv_want_endgame(loop, (uv_handle_t*)handle);
  } else if (handle->async_cb != NULL) {
    handle->async_cb(handle);
  }
}

可以看到基本上就是根據事件觸發對應的 callback , 而如果還需要後續的 IO 處理, 則會調用 WSAXXX 等等來下達非阻塞的 IO 命令。

整理

我們用一個簡化的流程來描述 libuv 的事件循環

  1. libuv 開始循環
  2. timer stage : 檢查 time heap 中有沒有逾時的定時任務, 有就執行
  3. pending stage : 檢查 pending queue 中有沒有任務, 有就依照類別執行特定處理與 callback function
  4. polling stage : 利用 IOCP 抓取新發生的事件, 並且存入 pending queue
  5. 回到 timer stage

補充 : 還有一個 endgame queue , pending 做完的事件會被推進該 queue , 在 endgame 階段關閉。

明天進度

基於篇幅與主題, 我就不去深究其細節, 明天趕緊進入 node 的 thread pool 篇

明天見 !


上一篇
[Day 24] Node Event loop 3
下一篇
[Day 26] Node thread pool 1
系列文
從C到JS的同步非同步探索30
圖片
  直播研討會
圖片
{{ item.channelVendor }} {{ item.webinarstarted }} |
{{ formatDate(item.duration) }}
直播中

尚未有邦友留言

立即登入留言