想請問一下?cisco 3550設定問題
之前設定一台3550.設了一個vlan200 ip address 192.168.10.2
設了一個 interface FastEthernet0/2
switchport access vlan 200
switchport mode access
nb設了192.168.10.3接上fa0/2發現不通
show int看到
Vlan200 is down, line protocol is down
interface Vlan200
no ip address
shutdown
問題1.進入vlan 200..下了no shutdown還是無法up請問有可能是那些問題?
問題2.如指訂了一個fa0/3...為trunk..vlan 300.
interface FastEthernet0/3
switchport trunk allowed vlan 300
switchport mode trunk
VLAN Name Status Ports

1 default active Fa0/1, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig1/1
Gig1/2
200 VLAN0200 active Fa0/2
300 VLAN0300 active

Fa0/3,因不回出現在vlan300 如何查看每個port設那些trunk~或帶那些vlan ?

問題2.5..一個port有時查看只有設switchport access vlan 300...沒設mode有差嗎?
如switchport access vlan 300
switchport mode trunk這樣又會如何?
問題3.copy flash: tftp cisco...BIN
COPY IOS..是不是最後是點bin那個就是ios..檔案會很大嗎?(所有型號都是.bin嗎)
因我用tftp32..copy..好像說空間滿了~到目前還沒copy成功過.(有沒特別技巧?)

問題4..如要copy到switch..指令如何下?